A flat steel hoop machine RFQ should describe the finished clamp, strip material, hole pattern and tooling requirements. Haihui’s HH100-20 combines straightening, servo feeding, hydraulic punching, forming and cutting. A drawing-based enquiry helps compare the complete component process.
Dimension the finished clamp
State strip width and thickness, material grade, bend radii, hole sizes, hole spacing and finished profile. Identify the mounting face or centreline used for inspection. Include any coating or surface requirement. If the clamp must fit another component, supply the approved mating dimensions instead of relying only on a photograph.
Review the material and geometry together
The HH100-20 reference page lists 3–10 mm processing thickness and a 50–500 mm side-length range. Strip width, steel strength and the complete part geometry still need confirmation. Do not assume that a thickness rating for one material applies unchanged to stainless steel or coated strip.
Specify tooling for every part family
List each hole pattern and profile to be produced. Ask which tools are included, which are optional and what a changeover requires. Sample photographs show possible forms, but they do not establish that one supplied die set can make every illustrated shape.
Compare accepted parts rather than nominal speeds
The listed 55 m/min maximum feeding speed and 800°/s bending speed are machine specifications. Hole count, hydraulic steps, bend sequence and handling determine component output. Request a full part cycle and inspect hole relationships after bending. Confirm payoff equipment, wear parts and the acceptance method in the quotation.
Frequently asked questions
Can a clamp quote be based only on strip thickness?
No. Width, grade, holes, bend geometry and tooling scope are also needed for a meaningful configuration review.
How can I request a factory quotation?
Send dimensioned drawings, material grade and sizes, required quantities, local power supply and the destination country. Ask Haihui to confirm configuration, accessories, inspection requirements and delivery terms in writing.
Related equipment from Haihui
Review the HH100-20 Flat Steel Hoop Forming Machine | Haihui for current product information, or browse the complete rebar processing machine range.
Contact the factory in Xingtai, China
Xingtai Haihui Machine Tool Co., Ltd. supplies rebar processing machinery from Renze District, Xingtai, Hebei, China. Discuss your application and request a written configuration and quotation.
WhatsApp / Telephone: +86 13932960232 · 417786525@qq.com · Contact Haihui
