Maintenance Checks for CNC Rebar Feeding and Curved Forming Work

Time：2026-11-04Views：4

Haihui CNC rebar stirrup bending equipment

Use the supplied manual as the maintenance reference

A maintenance plan should match the actual CNC rebar machine and any additional curved forming equipment. Lubrication points, intervals and adjustment procedures vary by configuration. Follow the supplied documentation and obtain clarification from the manufacturer when a service requirement is unclear.

Watch the feed path and forming tools

Check accessible guides, feed rollers and forming tools for wear, damage or abnormal buildup using the prescribed safe procedure. Feeding inconsistency can affect both straight lengths and curved profiles. Review cut quality and listen for unusual operation, then investigate the cause before continuing an affected batch.

Make adjustments under safe conditions

Keep guards and protective devices in service. Isolate energy and prevent unintended restart before maintenance or clearing a jam, following the machine instructions and site procedures. An emergency stop is not a substitute for the required isolation procedure. Electrical and mechanical servicing should be performed by qualified personnel.

Order parts with clear identification

Record the model, serial number and tool or component reference when asking for spares. Provide a photo where helpful, without assuming similar-looking parts are interchangeable. Contact Haihui for configuration-specific maintenance information and spare-part identification, and retain service records alongside production quality checks.